Please note: Although we may stop by occasionally, this is not a developer Q&A.
The second iteration of 2v8 is now LIVE - find out more information here: https://forums.bhvr.com/dead-by-daylight/kb/articles/480-2v8-developer-update
The November Developer Update is now available: https://forums.bhvr.com/dead-by-daylight/kb/articles/481-developer-update-november-2024-ptb

Otzdarva's Video - Hyperfocus + Stake Out Math

e1ix
e1ix Member Posts: 66
in Ask the Community

Recently Otzdarva posted a video on twitter wherein he did a generator from start to finish with an Alex's Toolbox in 47 seconds.

https://twitter.com/OtzdarvaYT/status/1566834750605647879

I was trying to do the calculations for this, but I keep coming up short. I am off by about 3 seconds. Here are my calculations below - can someone help me figure out the error in these calculations?


Alex’s Toolbox with scraps and wire spool = 44 charges


Speed of Alex’s Toolbox = 1.1

Time taken to deplete toolbox = 44/ 1.1 = 40 seconds


Remaining gen progress = 90 - 44 = 46 charges

Skill Checks Hit (with Hyperfocus and Stake Out) = 14

Bonus from Hyperfocus = 1 + 1.3 + 1.6 + 1.9 + 2.2 + 2.5 + 2.8 + (2.8 * 7) = 13.3 + (19.6) = 32.9% 

Additional Bonus from Stake out = 14% 

Total Skill Check Bonus = 46.9%


Time saved from skill checks = 46.9 * 90/100 = 42.21 seconds


Remaining Time needed to complete gen = 46 - 42.21 = 3.79 seconds


Total Time taken = 43.79  seconds

Answers

  • e1ix
    e1ix Member Posts: 66

    I thought that I had come up with a solution using these three Rules :

    1. When Stake Out has 0 tokens, there is NO benefit from Stake Out. You only get the benefit of Hyperfocus.

    2. When Stake Out has atleast 1 Token AND you hit the Great Skill Check, you get double the benefit of Hyperfocus.

    3. When Stake Out has atleast 1 Token AND you do not hit the Great Skill Check, you get the bonus from Hyperfocus + an additional 1% from Stake Out.


    But even with these rules, I am still off by about 4-5 seconds from the actual result.

    Could you please help suggest where I am going wrong? @Peanits

  • e1ix
    e1ix Member Posts: 66

    I would appreciate if someone has cracked the math and can help me with this.