Visit the Kill Switch Master List for more information on these and other current known issues: https://forums.bhvr.com/dead-by-daylight/kb/articles/299-kill-switch-master-list
We encourage you to be as honest as possible in letting us know how you feel about the game. The information and answers provided are anonymous, not shared with any third-party, and will not be used for purposes other than survey analysis.
Access the survey HERE!
Hey Devs, so did u fixed the controller speed loss issue? How is it performing now?
I'm asking because I found out that the controller had this sensitivity/speed loss when turning or whatever, I discovered that in some patch notes cause you talked about this problem only when it got fixed. I would like to know if it's fine now, i know the sensitivity will be always lower but I was wandering if it had any other problems
Comments
-
I'm curious to read the answer.
0 -
If you're referring to the issue where moving at an angle with an analog stick would move you slightly slower than the normal movement speed, that was indeed fixed in update 2.7.1. Now it doesn't matter where the stick is, as long as it's jammed over as far as it can go, you'll be moving the highest possible speed.
5 -
Now we just need a controller sensitivity buff to play the game on console the way it was designed
3 -
Yes, sensitivity is slow.
3 -
Ok thanks :)
0 -
It is actually broken on the PTB as well. In fact, it’s worse on the PTB than it was ever in the past, and it doesn’t only affect diagonals. Just moving forward is slow too. There is also a weird delay in movement now. I was getting stuck on things and had trouble moving, as the delay was really making things difficult.
I bought the PC version when it was only a few bucks 2 months ago, just so that I could play the PTB. I normally play on the PS4. If what is on the PTB makes it to the next release, it’s going to be hell playing with a controller.
0
